物理化学学报 >> 2002, Vol. 18 >> Issue (05): 473-476.doi: 10.3866/PKU.WHXB20020519

研究简报 上一篇    下一篇

TiO2修饰的镍基光电极的制备及光电化学性能

赵转清;姚素薇;张卫国;龚正烈   

  1. 天津大学化工学院应用化学系，天津　300072; 天津理工学院光电信息与工程系,天津　300191
  • 收稿日期:2001-09-11 修回日期:2001-12-31 发布日期:2002-05-15
  • 通讯作者: 姚素薇 E-mail:gongzl@public.tpt.tj.cn

Preparation and Photoelectrochemical Performance of Photoelectrode of TiO2 Film on Nickel

Zhao Zhuan-Qing;Yao Su-Wei;Zhang Wei-Guo;Gong Zheng-Lie   

  1. Department of Applied Chemistry, School of Chemical Engineering and Technology, Tianjin University, Tianjin　300072;Department of Optoelectronic Engineering, Tianjin Institute of Technology, Tianjin　300191
  • Received:2001-09-11 Revised:2001-12-31 Published:2002-05-15
  • Contact: Yao Su-Wei E-mail:gongzl@public.tpt.tj.cn

PDF (PC)

3279

赞

摘要： 通过溶胶凝胶法，直接在导电的金属镍基上制备多孔TiO2纳米薄膜，利用STM观察电极的表面形貌，所制TiO2粒径约为20～80 nm，随着烧结温度的升高，TiO2纳米薄膜表面孔的数量增多、孔径增大.用循环伏安法分析了电极的光电化学性能，结果表明，电极的光电响应随烧结温度的升高和薄膜厚度的增加而增大.

关键词: 溶胶-凝胶, TiO2, 纳米薄膜, 循环伏安法, 光电化学性能

Abstract: Nanosized porous TiO2 films supported on nickel are prepared by solgel process. The STM morphology of the nanosized TiO2 films has been given. It is known by STM, that the diameter of TiO2 particles is about 20～80 nm and the pore quantity and the diameter of nanosized TiO2 film increase with the increasing of sintering temperature. The photoelectrochemical performance of the prepared TiO2 photoelectrode is determined by cyclic voltammitric method. It is found that the photocurrent of the photoelectrode increases with the increasing of the sintering temperature and thickness of TiO2 film.

Key words: Sol-gel, TiO2, Nanosized film, Cyclic voltammitric method, 　Photoelectrochemical property