物理化学学报 >> 2007, Vol. 23 >> Issue (Supp): 10-13.doi: 10.3866/PKU.WHXB2007Supp03

研究论文 上一篇    下一篇

影响锰酸锂材料性能的工艺因素的化学模式识别

李卫; 同格拉格; 牟其勇; 其鲁; 郭进   

  1. 内蒙古力盟新能源有限公司, 呼和浩特 010080; 中信国安盟固利新能源科技有限公司, 北京 102200; 北京大学化学与分子工程学院应用化学系, 新能源材料与技术实验室, 北京 100871; 广西大学物理系, 南宁 530004
  • 收稿日期:1900-01-01 修回日期:1900-01-01 发布日期:2008-01-04
  • 通讯作者: 其鲁 E-mail:qilu@pku.edu.cn

Chemical Pattern Recognition Applied to the Analysis of Effect of Technology Factors on the Properties of Li-Mn-O Spinel Oxide

LI Wei; Tong-Ge-La-Ge; MU Qi-Yong; QI Lu; GUO Jin   

  1. Inner-Mongolia Limeng New Energy Co. Ltd., Huhehaote 010080, P. R. China; CITIC Guoan Mengguli New Engery Technology Co. Ltd., Beijing 102200, P. R. China; New Energy Materials and Technology Laboratory, Department of Applied Chemistry, College of Chemical and Molecular Engineering, Peking University, Beijing 100871, P. R. China; Department of Physics, Guangxi University, Nanning 530004, P. R. China
  • Received:1900-01-01 Revised:1900-01-01 Published:2008-01-04
  • Contact: QI Lu E-mail:qilu@pku.edu.cn

PDF (PC)

2463

赞

摘要： 利用化学模式识别方法对不同合成工艺条件制备的锰酸锂材料的放电容量和循环寿命进行了分析, 得出了提高锰酸锂材料相应性能的判据. 在锰酸锂材料的放电容量和循环寿命影响因素中, 锂锰比是最主要的影响因素, 添加剂是次要影响因素,合成温度、合成时间对性能影响很小.

关键词: 锰酸锂, 放电容量, 循环寿命, 化学模式识别

Abstract: The discharge capacity and the cycle lifetime of Li-Mn-O spinel oxide with different technology factors were analyzed by chemical pattern recognition method, and some criteria for improving material properties were obtained. The ratio of lithium to manganese was the primary influencing factor on discharge capacities and cycle lifetime for Li-Mn-O spinel oxide. Additive was the secondary influencing factor. Synthesis temperature and time
impacted the properties slightly.

Key words: Li-Mn-O spinel oxide, Discharge capacity, Cycle life time, Chemical pattern recognition

MSC2000: 

  • O646