物理化学学报 >> 2009, Vol. 25 >> Issue (07): 1385-1390.doi: 10.3866/PKU.WHXB20090727

研究论文 上一篇    下一篇

刷涂热分解法制备Ti/SnO2-Sb2O5阳极及其性能

孙智权, 陆海彦, 任秀彬, 黄卫民, 董艳杰, 林海波   

  1. 吉林大学化学学院, 长春 130012
  • 收稿日期:2008-12-15 修回日期:2009-04-03 发布日期:2009-06-26
  • 通讯作者: 林海波 E-mail:lhb910@jlu.edu.cn

Performances of Ti/SnO2-Sb2O5 Anodes Prepared by Brush Coating Thermal Decomposition Method

SUN Zhi-Quan, LU Hai-Yan, REN Xiu-Bin, HUANG Wei-Min, DONG Yan-jie, LIN Hai-Bo   

  1. College of Chemistry, Jilin University, Changchun 130012, P. R. China
  • Received:2008-12-15 Revised:2009-04-03 Published:2009-06-26
  • Contact: LIN Hai-Bo E-mail:lhb910@jlu.edu.cn

摘要:

通过刷涂热分解法制备了锑掺杂的钛基二氧化锡(Ti/SnO2-Sb2O5)涂层电极. 在酸性介质中, 用扫描电镜(SEM)、X射线衍射仪(XRD)、循环伏安和快速寿命测试等方法研究了Ti/SnO2-Sb2O5电极制备条件、电极结构、性能和寿命. 结果表明, Ti/SnO2-Sb2O5电极涂层具有“干泥”结构, 用锡锑摩尔比为9:1的涂液组成、在550 ℃烧结温度下制备的Ti/SnO2-Sb2O5的电极涂层平整致密,龟裂小, 电极孔隙率小, 稳定性最好.

关键词: 热分解, Ti/SnO2-Sb2O5电极, 刷涂, 制备, 性能

Abstract:

Antimony doped tin dioxide coated electrodes (Ti/SnO2-Sb2O5) on Ti substrates were prepared by the brush coating thermal decomposition method. Preparation conditions, structure, electrochemical characterization and service life of Ti/SnO2-Sb2O5 electrodes were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) and accelerated life test methods. Results show that Ti/SnO2-Sb2O5 electrodes have a dry cracked-mud coating structure. A Ti/SnO2-Sb2O5 electrode coating prepared at an annealing temperature of 550 ℃ and with a molar ratio of nSn:nSb=9:1 for the precursor solution has a flat and compact surface, few cracks, low porosity, and good stability.

Key words: Thermal decomposition, Ti/SnO2-Sb2O5 electrode, Brush coating, Preparation, Performance

MSC2000: 

  • O646