物理化学学报 >> 2012, Vol. 28 >> Issue (02): 338-342.doi: 10.3866/PKU.WHXB201111242

电化学和新能源 上一篇    下一篇

钛离子掺杂对LiFe0.6Mn0.4PO4/C 电化学性能的影响

高平1,2, 谭卓1,2, 成富圈2, 周恒辉2, 谭松庭1   

  1. 1. 湘潭大学化学学院, 湖南湘潭 411105;
    2. 北京大学化学与分子工程学院, 北京 100871
  • 收稿日期:2011-09-13 修回日期:2011-11-17 发布日期:2012-01-11
  • 通讯作者: 周恒辉, 谭松庭 E-mail:hhzhou@pku.edu.cn; tanst2008@163.com
  • 基金资助:

    国家高技术研究发展计划项目(863) (2009AA035200)资助

Effect of Doping with Ti4+ Ion on the Electrochemical Performance of LiFe0.6Mn0.4PO4/C

GAO Ping1,2, TAN Zhuo1,2, CHENG Fu-Quan2, ZHOU Heng-Hui2, TAN Song-Ting1   

  1. 1. College of Chemistry, Xiangtan University, Xiangtan 411105, Hunan Province, P. R. China;
    2. College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China
  • Received:2011-09-13 Revised:2011-11-17 Published:2012-01-11
  • Contact: ZHOU Heng-Hui, TAN Song-Ting E-mail:hhzhou@pku.edu.cn; tanst2008@163.com
  • Supported by:

    The project was supported by the National High-Tech Research and Development Program of China (863) (2009AA035200).

摘要: 采用固相法合成了钛离子掺杂LiFe0.6Mn0.4PO4/C 正极材料. 通过X射线衍射(XRD)、扫描电镜(SEM)以及电化学测试, 对合成材料的结构、形貌和电化学性能进行了表征. 结果表明: 钛离子掺杂未影响材料的晶型结构, 但显著改善了材料的电化学性能; Li(Fe0.6Mn0.4)0.96Ti0.02PO4/C 材料表现出优异的倍率性能, 0.1C倍率下其比容量为160.3 mAh·g-1; 在10C 倍率下, 比容量为134.7 mAh·g-1; 特别是在20C 高倍率下仍然具有124.4mAh·g-1的放电比容量. 电化学交流阻抗谱(EIS)和循环伏安(CV)测试结果说明, 通过钛离子掺杂导致材料阻抗和极化的减少是材料倍率性能改善的主要原因.

关键词: 锂离子电池, 磷酸铁锰锂, 正极材料, 离子掺杂, 倍率性能

Abstract: Ti-doped LiFe0.6Mn0.4PO4/C materials were synthesized by a solid-state method. The structures, morphologies, and electrochemical performance of the materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and galvanostatic charge-discharge experiments. The results indicate that Ti4+ doping does not change the structure of the materials, but remarkably improves their electrochemical performance. Li(Fe0.6Mn0.4)0.96Ti0.02PO4/C shows excellent rate performance, with initial specific discharge capacities of 160.3 and 134.7 mAh·g-1 at 0.1C and 10C rates. Even at the higher rate of 20C, it shows a discharge capacity of 124.4 mAh·g-1. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) analyses show that the resistance and the polarization of the LiFe0.6Mn0.4PO4/C composite electrode could be effectively decreased by Ti4+ doping, which would account for the improved electrode performance.

Key words: Lithium-ion battery, LiFe1-xMnxPO4, Cathode material, Ion doping, Rate capacity

MSC2000: 

  • O646