物理化学学报 >> 2009, Vol. 25 >> Issue (03): 441-445.doi: 10.3866/PKU.WHXB20090308

研究论文 上一篇    下一篇

二氧化锡填充多壁碳纳米管材料的制备及电化学性能

马若彪 付延鲍 马晓华   

  1. 复旦大学材料科学系, 上海 200433
  • 收稿日期:2008-09-24 修回日期:2008-12-18 发布日期:2009-03-02
  • 通讯作者: 马晓华 E-mail:xhma@fudan.edu.cn

Preparation and Electrochemical Performance of Tin-Dioxide Filled Multi-Walled Carbon Nanotubes

 MA Ruo-Biao, FU Yan-Bao, MA Xiao-Hua   

  1. Department of Materials Science, Fudan University, Shanghai 200433, P. R. China
  • Received:2008-09-24 Revised:2008-12-18 Published:2009-03-02
  • Contact: MA Xiao-Hua E-mail:xhma@fudan.edu.cn

PDF

2411

赞

摘要：

用硝酸氧化法处理多壁碳纳米管(MWCNTs), 使得MWCNTs端口打开, 长度变短, 表面得到改性. 通过二氯化锡与硝酸银反应, 过滤后的溶液在浓硝酸环境中, Sn2+在毛细作用下扩散进入碳纳米管管腔, 吸附、成核并在热处理作用下沉积, 从而制备出SnO2/MWCNTs纳米复合材料. XRD和TEM测试表明, 部分SnO2填充到MWCNTs管腔, 形成不连续的纳米颗粒. 电化学测试表明, SnO2填充的MWCNTs可以结合两者的优势, 使得复合材料的循环性能和比容量均有所改善.

关键词: 碳纳米管, 二氧化锡, 纳米复合材料, 锂离子电池

Abstract:

Multi-walled carbon nanotubes (MWCNTs) were purified and chopped by nitric acid. Tin dioxide filled MWCNTs were prepared via a diffusion method. A tin dichloride solution was mixed with AgNO3, filtered and then MWCNTs were sonicated in the filtrate. After calcination in N2 atmosphere the salt filled in the MWCNTs decomposed to SnO2. Structural and morphological characterization of the composite material by X-ray diffraction (XRD) and transmission electron microscopy (TEM) showed that the MWCNTs were filled with discrete nano-SnO2 particles. Compared to pristine MWCNTs and purified-MWCNTs, the SnO2-filled MWCNTs exhibited high capacity and good cyclability during charge-discharge cycling. The SnO2/MWCNTs nanocomposites showed better cyclability than pure SnO2 nano-materials.

Key words: Carbon nanotubes, Tin-dioxide, Nanocomposite, Lithium-ion battery

MSC2000: 

  • O646