Acta Phys. -Chim. Sin. ›› 2007, Vol. 23 ›› Issue (05): 647-650.doi: 10.1016/S1872-1508(07)60042-4

• ARTICLE • Previous Articles     Next Articles

Influence of Non-isothermal Melt Crystallization on the Thermal Behavior and Morphology of Poly-L-lactide

ZHOU Zhi-Hua; RUAN Jian-Ming; ZHOU Zhong-Cheng; ZOU Jian-Peng   

  1. State Key Laboratory for Powder Metallurgy, Central-South University, Changsha 410083, P. R.China; College of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan 411201, Hunan Province, P. R.China
  • Received:2006-11-03 Revised:2006-12-31 Published:2007-04-28
  • Contact: RUAN Jian-Ming

Abstract: The influence of non-isothermal melt crystallization on thermal behavior and morphology of poly-L-lactide (PLLA) was investigated by differential scanning calorimetry (DSC), polarizing micrograph (POM), and scanning electron microscopy (SEM). Crystallization performed at lower cooling rate (2 ℃·min-1) was accompanied by a change of the kinetics around 118 ℃. The glass transition temperature of PLLA decreased with the increase of cooling rate. The crystallinity at the end of crystallization and the size of PLLA spherulites increased with decreasing cooling rate, and PLLA became almost amorphous cooled at a rapid rate of 10 ℃·min-1. PLLA biodegradable material with spherulites structure was obtained by using compression mould and controlling the cooling rates, and spherulites developed rapidly at lower cooling rates. The fracture surfaces of PLLA at low cooling rates were more compacter and smoother, but more brittle, than those at high cooling rates.

Key words: Poly-L-lactide, Non-isothermal melt crystallization, Thermal behavior, Morphology


  • O641