Acta Phys. -Chim. Sin. ›› 2006, Vol. 22 ›› Issue (07): 831-835.doi: 10.1016/S1872-1508(06)60035-1

• ARTICLE • Previous Articles     Next Articles

Preparation of Macroporous Al2O3 by Template Method

WANG Xiao-Dong;DONG Peng;CHEN Sheng-Li   

  1. State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, P. R. China
  • Received:2006-01-16 Revised:2006-03-16 Published:2006-06-27
  • Contact: DONG Peng

Abstract: Macroporous material of Al2O3 was prepared through mixing a Al2O3 sol with polystyrene (PS) particles as templates, drying the suspension, and finally calcining it to remove the templates. The measurement obtained from the scanning electron microscopy (SEM) showed that the formed macroporous materials had a vesicle-like structure and most of the voids left by the templates were isolated from each other. The zeta-potential value indicated that the PS spheres carried negative charges, whereas the alumina particles carried positive charges. During the preparation of macroporous Al2O3, the Al2O3 colloidal particles were adsorbed on the surface of the PS particles, and the PS with the shell of Al2O3 particles played the role of templates, resulting in the formation of vesicle-like structures. To avoid the formation of the vesicle-like structure materials, the PS was switched from a negative charge to a positive charge through surface modification with PD (poly (diallyl-dimethyl ammonium chloride)), so that PS spheres carried the same kind of charge as the Al2O3 colloidal particles. The SEM images showed that the macroporous material of Al2O3, prepared using the modified PS spheres as templates, was free from the vesicle-like structure and voids left by the templates were connected through some windows.

Key words: Macroporous material of Al2O3, Template method, Polystyrene spheres, Alumina sol, Electric property modification