Acta Phys. -Chim. Sin. ›› 2005, Vol. 21 ›› Issue (12): 1337-1342.doi: 10.3866/PKU.WHXB20051202

• ARTICLE • Previous Articles     Next Articles

Direct Oxido-amination of Benzene to Aniline over Nickel-Vanadium Catalysts

XIA Yun-Sheng;ZHU Liang-Fang;LI Gui-Ying;HU Chang-Wei   

  1. 1Key Laboratory of Green Chemistry and Technology, Ministry of Education, College of Chemistry, Sichuan University, Chengdu 610064; 2College of Chemistry and Chemical Engineering, Bohai University, Jinzhou 121003
  • Received:2005-04-12 Revised:2005-06-06 Published:2005-12-15
  • Contact: HU, Chang-Wei E-mail:gchem@scu.edu.cn, chwehu@mail.sc.cninfo.net

Abstract: A series of Ni-V/γ-Al2O3 catalysts were prepared and used in the one-step synthesis of aniline from benzene, hydrogen peroxide, and aqueous ammonia and/or urea. It was found that both Ni/γ-Al2O3 and V/γ-Al2O3 catalysts were effective for the activation of C—H bond of benzene, and the co-existed Ni and V on γ-Al2O3 exhibited synergetic effects which promoted the formation of aniline. When the molar ratio of Ni to V was 5.5, the Ni-V/γ-Al2O3 catalyst showed the highest activity and selectivity for aniline. The highest selectivity to aniline obtained was 85%, which was far higher than that to the by-product phenol. The optimal conditions obtained in present work were as the following: reaction time, 2 h; reaction temperature, about 333 K. Urea was found to be one possible aminating agent for this one-step process in basic reaction media. The synergic effect between ammonia and urea under the conditions investigated was found favorable for the production of aniline.

Key words: Aniline, Aqueous ammonia, Hydrogen peroxide, Urea, Benzene