物理化学学报 >> 2013, Vol. 29 >> Issue (06): 1266-1272.doi: 10.3866/PKU.WHXB201304091

催化和表面科学 上一篇    下一篇

五乙烯六胺修饰的MCF基吸附剂的制备及其CO2吸附性能研究

冯星星, 谢菁, 胡庚申, 贾爱平, 谢冠群, 罗孟飞   

  1. 浙江师范大学物理化学研究所, 先进催化剂材料教育部重点实验室, 浙江 金华 321004
  • 收稿日期:2012-12-27 修回日期:2013-04-08 发布日期:2013-05-17
  • 通讯作者: 胡庚申, 罗孟飞 E-mail:gshu@zjnu.edu.cn; mengfeiluo@zjnu.cn
  • 基金资助:

    国家自然科学基金(21203167)资助项目

Preparation of Pentaethylenehexamine-Functionalized Mesocellular Silica Foams and Their Application for CO2 Adsorption

FENG Xing-Xing, XIE Jing, HU Geng-Shen, JIA Ai-Ping, XIE Guan-Qun, LUO Meng-Fei   

  1. Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Institute of Physical Chemistry, Zhejiang Normal University, Jinhua, Zhejiang 321004, China
  • Received:2012-12-27 Revised:2013-04-08 Published:2013-05-17
  • Supported by:

    The project was supported by the National Natural Science Foundation of China (21203167).

摘要:

以三嵌段共聚物P123 (EO20-PO70-EO20)为模板剂合成了介孔泡沫氧化硅(MCF)材料. MCF经过五乙烯六胺(PEHA)修饰后用于捕捉CO2. 采用扫描电镜(SEM)、透射电镜(TEM)、N2吸附-脱附、傅里叶变换红外(FTIR)光谱、热重分析(TGA)对MCF和MCF-PEHA进行了表征. 结果表明, PEHA对MCF改性后, 并没有破坏MCF载体本身的结构. MCF-PEHA的CO2吸附量在75℃时达到最大. 随着PEHA含量的增加, MCF-PEHA的CO2吸附量呈先增大后减小的趋势, 当PEHA含量为70% (w)时, CO2吸附量达到最大, 为3.55 mmol·g-1. 水汽促进了吸附剂的CO2吸附性能. 研究结果还表明, MCF-70吸附剂经过四次吸脱附循环, 吸附性能基本保持不变, 表现出很好的可再生性能.

关键词: 介孔泡沫氧化硅, 五乙烯六胺, 吸附, CO2

Abstract:

Mesocellular silica foam (MCF) was prepared using P123 (EO20-PO70-EO20) as template and then functionalized with pentaethylenehexamine (PEHA) for CO2 adsorption. The samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorptiondesorption isotherms, Fourier transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA). These results indicated that after modification with PEHA, the structure of the support itself was undamaged. The highest CO2 adsorption capacity of MCF-PEHA was obtained at 75℃. With increasing PEHA loading, the CO2 adsorption capacity increases and approached the highest adsorption capacity (3.55 mmol·g-1) with a 70% (w) PEHA loading. Moisture improved the CO2 adsorption performance of the adsorbents. Repeated adsorption-desorption cycling indicated that the sorbents maintained stable CO2 adsorption capacity after 4 cycles, indicating potential for regeneration of the adsorbents.

Key words: Mesostructure cellar foam, Pentaethylenehexamine, Adsorption, CO2