物理化学学报

上一篇    下一篇

具有Fe3O4和银纳米颗粒的不对称双层芳纶纳米纤维复合气凝胶用于高性能电磁屏蔽

王明艳1, 侯金啸1, 程琳琳1, 李海丰2, 陈韶娟3, 王越2, 江亮1, 周彦粉1   

  1. 1 青岛大学纺织服装学院, 山东 青岛 266071;
    2 湖北汽车工业学院汽车材料学院, 湖北 十堰 442002;
    3 青岛理工大学艺术与设计学院, 山东 青岛 266033
  • 收稿日期:2026-06-02 修回日期:2026-07-29 录用日期:2026-08-11
  • 通讯作者: 江亮, 周彦粉 E-mail:liang.jiang@qdu.edu.cn;yanfen.zhou@qdu.edu.cn
  • 基金资助:
    本研究得到了山东省自然科学基金(ZR2026MS0745,ZR2023ME091)和青岛市科技惠民示范专项(25-1-5-cspz-8-nsh)的资助。

Asymmetric bilayer aramid nanofiber composite aerogels with Fe3O4 and silver nanoparticles for high-performance electromagnetic shielding

Mingyan Wang1, Jinxiao Hou1, Linlin Cheng1, Haifeng Li2, Shaojuan Chen3, Yue Wang2, Liang Jiang1, Yanfen Zhou1   

  1. 1 College of Textiles and Engineering, Qingdao University, Qingdao 266071, Shandong Province, China;
    2 School of Automotive Materials, Hubei University of Automotive Technology, Shiyan 442002, Hubei Province, China;
    3 College of Arts and Design, Qingdao University of Technology, Qingdao 266033, Shandong Province, China
  • Received:2026-06-02 Revised:2026-07-29 Accepted:2026-08-11
  • Contact: Liang Jiang, Yanfen Zhou E-mail:liang.jiang@qdu.edu.cn;yanfen.zhou@qdu.edu.cn

摘要: 现代通信技术的快速发展导致电磁干扰污染日益严重,亟需开发兼具优异屏蔽效能与低反射特征的轻质屏蔽材料。本研究采用顺序真空抽滤技术,制备了由ANF/Fe3O4磁性吸收顶层和ANF/AgNPs导电反射底层构成的不对称双层复合气凝胶。Fe3O4纳米颗粒和AgNPs原位沉积在芳纶纳米纤维上,形成紧密的界面结合。系统研究了Fe3O4负载量和吸收层厚度对微观结构、磁性能和电磁屏蔽性能的影响。最优样品(Fe-HK/Ag)的电磁屏蔽效能达80.6 dB,反射系数低至0.75。其屏蔽机制遵循“吸收-反射-再吸收”多重损耗路径:导电ANF/AgNPs层提供强反射,ANF/Fe3O4层贡献磁损耗和介电损耗,多孔ANF网络促进多重散射。方向依赖性测试表明,从ANF/Fe3O4层入射时反射更低、吸收更强,有利于减少二次电磁污染。此外,复合气凝胶表现出优异的热稳定性和超顺磁行为。本研究为开发轻质、高效、低反射的电磁屏蔽材料提供了可行路径,这些材料在航空航天、可穿戴设备和先进通信技术等领域具有潜在应用价值。

关键词: 芳纶纳米纤维, 四氧化三铁纳米颗粒, 银纳米颗粒, 双层气凝胶, 电磁干扰屏蔽

Abstract: The rapid growth of modern communication technologies leads to increasingly serious electromagnetic interference (EMI) contamination, creating an urgent need for lightweight shielding materials that combine excellent shielding effectiveness (SE) with minimized reflected waves. In this work, an asymmetric bilayer composite aerogel consisting of a top ANF/Fe3O4 magnetic absorption layer and a bottom ANF/AgNPs conductive reflective layer using a sequential vacuum filtration technique was fabricated. Fe3O4 nanoparticles and AgNPs are in situ deposited onto aramid nanofibers (ANFs), forming tight interfacial contacts. The effects of Fe3O4 loading and absorption layer thickness on the microstructure, magnetic properties, and EMI shielding performance are systematically investigated. The optimal sample (Fe-HK/Ag) achieves an EMI SE of 80.6 dB with a reduced reflection coefficient of 0.75. The shielding mechanism follows an “absorption-reflection-reabsorption” multiple-loss pathway, where the conductive ANF/AgNPs layer provides strong reflection, while the ANF/Fe3O4 layer contributes magnetic and dielectric losses, and the porous ANF network promotes multiple scattering. Direction-dependent measurements show that incident from the ANF/Fe3O4 layer yields lower reflection and higher absorption, favorable for reducing secondary electromagnetic pollution. Moreover, the composite aerogels exhibit outstanding thermal stability and superparamagnetic behavior. This study offers a feasible route to develop lightweight, high-efficiency, and low-reflection EMI shielding materials with potential uses in aerospace, wearable devices, and advanced communication technologies.

Key words: Aramid nanofibers, Fe3O4 nanoparticles, Silver nanoparticles, Bilayer aerogel, Electromagnetic interference shielding