物理化学学报 >> 2008, Vol. 24 >> Issue (06): 1100-1104.doi: 10.3866/PKU.WHXB20080633

研究简报 上一篇    下一篇

氟橡胶/改性乙丙橡胶并用胶的热稳定性

王亚明; 刘岚; 罗远芳; 贾德民   

  1. 华南理工大学材料科学与工程学院, 广州 510641
  • 收稿日期:2008-01-17 修回日期:2008-02-19 发布日期:2008-06-03
  • 通讯作者: 刘岚 E-mail:psliulan@scut.edu.cn

Thermal Stability of Fluoroelastomer/MEPDM Blends

WANG Ya-Ming; LIU Lan; LUO Yuan-Fang; JIA De-Min   

  1. College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, P. R. China
  • Received:2008-01-17 Revised:2008-02-19 Published:2008-06-03
  • Contact: LIU Lan E-mail:psliulan@scut.edu.cn

PDF

2622

赞

摘要： 采用热分析技术考察了氟橡胶及氟橡胶(FPM)/改性乙丙橡胶(MEPDM)并用胶在氮气中的热稳定性, 通过微分法与积分法两种动力学方法计算出了FPM及FPM/MEPDM并用胶的热分解活化能E和指前因子A. 结果表明, 并用胶的热分解温度稍高于纯的氟橡胶, 但热分解活化能略低于氟橡胶, FPM、FPM/MEPDM(5%)和FPM/MEPDM(10%)的热分解活化能分别为251.74、244.98和219.60 kJ·mol-1; 热分解反应级数n均为0.95. 随着失重百分率的增大, 热分解活化能增大.

关键词: 氟橡胶, 并用胶, 热稳定性动力学

Abstract: The thermal degradation behaviors of fluoroelastomer and the blends of fluoroelastomer/MEPDM were investigated by thermogravimetry (TG) and derivative thermogravimetry (DTG). The kinetic parameters were evaluated by differential method and integral method. The results showed that the fluoroelastomer/MEPDM blends had higher thermal degradation temperature, but smaller apparent activation energy E than FPM, the E values were 251.74, 244.98, and 219.60 kJ·mol-1 for FPM, FPM/MEPDM(5%), and FPM/MEPDM(10%), respectively. The thermal decomposition reaction order was 0.95 for both FPM and FPM/MEPDM blends. The thermal decomposition apparent activation energy E increased with increasing mass fraction loss α. The TG and DTG results suggested that the FPM/MEPDM blends had excellent thermalstability. The kinetic data indicated that the FPM/MEPDM blends decomposed easily than FPMafter onset degradation temperature.

Key words: Fluoroelastomer, Rubber blends, Thermal stability, Kinetics